MIL-DTL-62337C(AT)
ASTM INTERNATIONAL
ASTM C800
-
Glass Fiber Blanket Insulation (Aircraft Type) (DoD
Adopted).
(Copies are available from the American Society for Testing and Materials, 100 Barr Harbor
Drive, West Conshohocken, PA 19428-2959 or website: https://www.astm.org.)
SAE INTERNATIONAL
SAE AS478
-
Identification Marking Methods (DoD Adopted).
(Copies of this document are available from www.sae.org or SAE Customer Service, 400
Commonwealth Drive, Warrendale, PA 15096-0001.)
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIO (ISO)
ISO 5011
-
Inlet Air Cleaning Equipment for Internal Combustion
Engines and Compressors Performance Testing
(Copies of these documents are available from www.iso.org or American National Standards
Institute, 11 West 42nd Street, New York, N.Y. 10036.)
2.4 Order of precedence. In the event of a conflict between the text of this document and
the references cited herein, the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has
been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.5.
3.2 Material. Materials shall be uniform and free from imperfections or defects which
affect their serviceability (see 4.8.1).
3.2.1 Corrosion protection. All metallic parts shall be made from corrosion resistant
steels or treated/ plated with corrosion-resistant materials (see 3.7.2 and 4.8.1).
3.2.2. Asbestos and cadmium usage. Asbestos and cadmium materials shall not be used
in any form in any part of the assembly (see 4.8.1).
3.2.3 Radioactive material usage. No item, part or assembly shall contain radioactive
materials in which the specific activity is greater than 0.002 microcurie per gram or activity per
item equals or exceeds 0.01 microcuries (see 4.8.1).
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business