MIL-PRF-62048C
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
- Air Cleaners Test Code, Recommended Practice.
SAE J726
(Application for copies should be addressed to Society of Automotive Engineers, Inc.,
400 Commonwealth Drive, Warrendale, PA 15096.)
GENERAL MOTORS CORPORATION (GM)
- Accelerated Corrosion Test
GM 9540
(Application for copies should be addressed to General Motors Corporation, c/o Global
Engineering, 15 Inverness Way, Englewood, CO 80112.)
2.4 Order of precedence. In the event of a conflict between the text of this document
and the references cited herein, the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has
been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.2.
3.2 Materials. Unless otherwise specified herein, materials used shall be in accordance
with the manufacturer's materials specifications for air cleaners. The materials shall be capable
of meeting all of the operational and environmental requirements specified herein (see 4.5.1).
3.2.1 Recycled, recovered, or environmentally preferable materials. Recycled,
recovered or environmentally preferable materials should be used to the maximum extent
possible provided that the material meets or exceeds the operational and maintenance
requirements, and promotes economically advantageous life cycle costs.
3.3 Design and construction. Unless otherwise specified by the procuring
activity/acquisition document (see 6.2), the air cleaner shall conform to the manufacturer's
design and construction for dry type air cleaners except to assure performance in accordance
with the requirements specified herein, to facilitate the installation of an air filter element
specified in MIL-PRF-46736 for which it was designed. Design features shall provide for use of
the air cleaner in either gasoline or diesel fueled engines. Construction dimensions and rated
airflow shall be in accordance with the applicable drawings or MS standard (see 4.5.1 and 4.5.2).
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business