MIL-PRF-46736E
4. VERIFICATION
4.1 Classification of inspection. The inspection requirements specified herein are
classified as follows:
a. First article inspection (see 4.1.1).
b. Conformance inspection (see 4.1.2).
4.1.1 First article inspection. First article inspection shall be performed on the initial
production ready production-representative units of an order (up to 10 units) or when required by
the contract. When a first article inspection is required (see 3.1 and 6.3), it shall include all
verifications listed in table II.
4.1.2 Conformance inspection. Conformance inspection shall include the examinations
and tests listed in table II as defined by the contract.
TABLE II. Classification of inspections.
Title
Requirement
Verification
Design, materials, and manufacturing
3.2 & 3.2.1
4.3.1
processes
3.3
4.4
Operating requirements
Flame resistance
3.3.1
4.4.1
Crush resistance
3.3.2
4.4.2
Efficiency
3.3.3
4.4.3
Dust capacity
3.3.4
4.4.4
Post service airflow restriction
3.3.5
4.4.5
Backfire
3.3.6
4.4.6
Differential pressure
3.3.7
4.4.7
3.4
4.3
Interface requirements
Envelope interface
3.4.1
4.3
3.5
4.5
Ownership and support requirements
Washing durability
3.5.1
4.5.1
Marking
3.5.2
4.5.2
Quality and safety
3.5.3
4.5.3
3.6
4.6
Operating environment requirements
Seal ozone resistance
3.6.1
4.6.1
Vibration
3.6.2
4.6.2
Efficiency after vibration
3.6.3
4.6.3
4.2 Order of inspection. The verification tests shall be performed in the order as specified
in table III.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business